4G versus 5G mobile exits for scraping work
The question that arrives before any other
“Is it 5G?” is one of the first things people ask about a mobile proxy, often before they ask which carrier it’s on or how rotation works. It’s an understandable question. Phone advertising has spent years telling everyone that 5G is the fast, modern one and 4G is the old one, and it’s natural to assume that a scraper running through a 5G exit gets something better.
I run a mobile modem farm, so I see this from the hardware side: the dongles, the SIMs, the racks, the power supplies and the carrier behaviour behind all of it. From there, the honest answer is that the radio generation matters much less to a scraper than the question suggests. Some things really do change between 4G and 5G exits. Most of them affect the operator’s costs and the exit’s stability. Very few of them affect what the target website sees.
This piece walks through what changes and what doesn’t. It’s deliberately conceptual. I’m not going to quote speed tests or latency figures, because those depend on the tower, the band, the time of day, the building the modem sits in and a dozen other things, and a number measured in one rack says nothing about yours.
The companion pieces on this site cover when mobile addresses are worth their premium at all, how carrier NAT puts many people on one exit, and why rotating too fast gets a line barred by the carrier. This one assumes you’ve already decided a mobile exit fits the job, and asks whether the generation of the radio should change which one you buy.
What the radio generation actually is
A mobile connection has two very different parts, and the 4G versus 5G label only describes one of them.
The first part is the radio link: the wireless connection between the modem and the nearest cell tower. That’s where 4G and 5G differ. They use different radio technologies, different frequency bands in many cases, and different ways of scheduling data over the air. This is the part phone advertising talks about.
The second part is everything behind the tower. The tower connects to the carrier’s core network, where the carrier authenticates the SIM, assigns the connection an address, applies its policies, and eventually hands traffic to the wider internet through gateways. It’s in that core, and at those gateways, that your exit’s public address and its NAT behaviour are decided.
A website on the other end of your scraper only ever sees the second part. Your request arrives from a public address belonging to the carrier, announced by the carrier’s network, exiting through one of its gateways. There’s nothing in an HTTP request that says which radio carried it for the first few hundred metres.
So the useful way to think about 4G versus 5G is this: it describes the first hop, and the target sees the last hop. Anything about the radio that matters to a scraper matters indirectly, through stability, cost or how the carrier’s core treats the connection.
Non-standalone 5G and the shared core
The next thing to understand is that a lot of 5G isn’t a separate network at all.
Most carriers introduced 5G in what’s called non-standalone mode. In that setup, the 5G radio carries data, but the connection is anchored to the existing 4G core network. The device keeps a 4G link for control signalling and adds 5G capacity on top. The authentication, address assignment and gateways are the same ones the carrier’s 4G subscribers use.
That has a direct consequence for scraping. On a non-standalone 5G connection, the exit address typically comes from the same core and the same gateway pools as a 4G connection on the same carrier. The NAT behaviour is the same because it’s the same NAT. The address ranges a target sees are the same ranges it sees for the carrier’s 4G users. From the target’s side, a 4G exit and a non-standalone 5G exit on one carrier are generally indistinguishable.
Standalone 5G is different. There the radio connects to a new 5G core, and the carrier can make different choices about addressing, gateways and policy. Some carriers run separate address pools for standalone 5G. Some run the same ones. It’s a carrier configuration decision, and carriers don’t usually publish it.
Many carriers now run a mix, with standalone available in some areas or on some plans, and non-standalone elsewhere. A device can move between the two as it moves between coverage areas or as network conditions change.
So “5G” on a proxy listing might mean a non-standalone connection anchored to the same 4G core, a standalone connection on a newer core, or a device that’s 5G capable but currently attached over 4G. Those three can look identical from the listing and behave differently underneath.
Carrier NAT belongs to the carrier, not the radio
Carrier-grade NAT is the reason mobile exits behave the way they do for scraping. Many subscribers share one public address, the address changes on reconnect depending on carrier policy, and sites are cautious about blocking carrier addresses because so many ordinary users sit behind them. The carrier NAT piece on this site goes through the mechanics.
All of that is set in the carrier’s core and gateways. How many subscribers share a public address, how long a mapping lasts, whether a reconnect gets a new public address or the old one, whether IPv6 is offered and how it’s assigned: those are carrier configuration choices, often made per access point name, which is the setting on the SIM or modem that selects which part of the carrier network a device connects through.
The radio generation doesn’t decide any of it. A carrier that shares addresses heavily on 4G usually does the same on non-standalone 5G, because it’s the same infrastructure. A carrier with generous IPv6 on one APN may offer it identically on both.
This matters when you compare offerings. A 5G exit on a carrier with heavy address sharing and a 4G exit on a carrier with light sharing will behave differently for your scraper, and the difference comes from the carrier. If you’re choosing between them, the carrier question is the one that moves the result.
On a farm, the APN is one of the settings we pay most attention to, because the wrong one can give a line no working data at all or a different addressing regime. That’s true whatever generation the modem supports.
What the target actually sees
It’s worth being precise here, because a lot of confusion about 5G proxies comes from assuming the target can tell.
The target sees the public source address of the connection, and from that it can look up the network that announces it, usually the carrier’s own. It can look up reverse DNS, which for carrier addresses often reveals little beyond the carrier’s name. It can consult reputation data about that address and its range. And it sees everything your client sends: headers, TLS handshake, cookies, and in a browser, whatever scripts on the page collect.
None of that tells the site whether the first hop was 4G or 5G. Carriers don’t label packets by radio type for the outside world. Where a carrier uses separate address pools for standalone 5G, a site could in principle learn which ranges those are, but that tells it about the carrier’s addressing, and it would still look like ordinary mobile traffic from that carrier.
There’s one related thing people ask about. Browsers expose a network information interface to page scripts, reporting an estimated connection quality such as a guess at effective bandwidth class. That estimate describes the device the browser runs on, measured from its own round trips. When a browser runs on a server and sends traffic through a mobile proxy, the estimate reflects the server’s view of its own connection plus the proxy path, and it has nothing to do with the modem’s radio. So a mobile exit, 4G or 5G, doesn’t change what the client reports about itself. The piece on what your scraper leaks besides its IP covers that broader point.
The practical conclusion is short. For the target’s view, the carrier and the address matter, and the radio doesn’t.
Device and SIM cost on the operator side
The operator side is where 5G changes things most, and those changes show up in what a provider charges and how reliable the line is.
5G-capable modems and dongles generally cost more than 4G-only ones. Mature 4G hardware has been manufactured in huge volumes for years, and industrial 4G modules are commodity parts. 5G modules are newer, more complex, and sold in smaller volumes into the kind of USB and embedded form factors a farm uses. A farm replacing hardware over time pays that difference on every unit.
SIM plans matter as well. Carriers price data plans in their own ways, and 5G access is sometimes included, sometimes tied to specific plan tiers, and sometimes restricted by device type. A plan that allows 5G on a phone doesn’t always allow it on a data dongle. An operator has to check that the plan, the SIM and the device all agree before a 5G line is even possible.
Then there’s the rest of the stack. More capable modems draw more power. They produce more heat, which in a dense rack becomes a cooling and stability problem. They may need firmware attention that older 4G modules settled years ago. Each of those costs something in hardware, electricity or operator time.
None of this is a reason to avoid 5G. It’s the reason a 5G line often costs more to buy. When you compare a provider’s 4G and 5G prices, the gap mostly reflects their costs. Whether it reflects a benefit to your scraper is a separate question, and the rest of this piece suggests the answer is often “not much”.
Power, heat and the rack nobody photographs
Proxy listings show a clean dashboard. The physical side is a room full of modems and USB hubs, plus the power supplies and cabling that keep them alive, and that’s where the generation of the radio shows up in ways buyers rarely think about.
A USB port and a USB hub have a power budget. A modem draws the most power when it’s transmitting hard or struggling for signal, and more capable modems tend to draw more at peak. Put many of them on shared hubs, and the peaks can line up: a batch of modems reconnecting at once, or all pushing data during a busy hour, can pull a hub’s supply to the edge of what it can deliver. When that happens, modems brown out, drop off the bus and reconnect. From the scraper’s side, that’s a burst of failed requests and a set of exits that change address at the same moment.
Heat follows power. A modem that runs hot in open air runs hotter packed next to dozens of others in a closed rack. Radio modules protect themselves when they get too warm, typically by reducing transmit power or throughput, and at the extreme by resetting. Neither shows up in any label. Both show up as an exit that’s slower in the afternoon than in the morning, or one that drops for no visible reason.
None of this is unique to 5G. A badly powered 4G farm has the same problems. But the margins are tighter with hardware that draws and dissipates more, so a 5G farm needs more attention to power supplies, hub selection, spacing and airflow to reach the same stability.
That’s a question worth asking a provider in plain terms: how are the modems powered, and what happens when a hub fails? An operator who has thought about it will have an answer. An operator who hasn’t will tell you about the speed.
Coverage and the fallback problem
Coverage is where 5G gets complicated for a stationary modem.
A farm puts modems in one place and leaves them there, usually indoors. 5G coverage varies a lot by band. Lower frequency bands travel far and penetrate buildings reasonably well. Higher frequency bands carry more capacity but struggle with walls, windows and distance. Depending on which bands a carrier deploys in an area, a modem sitting in a rack might get strong 5G, weak 5G, or none, and that can change as the carrier adjusts its network.
When 5G signal is weak, a modem normally falls back to 4G. That’s by design and it’s usually a good thing, since the alternative is losing the connection. But the transition isn’t always clean. A modem near the edge of 5G coverage can move back and forth between 5G and 4G as signal fluctuates. Each transition can cause a brief interruption. In some setups, and on some carriers, a transition or a re-attach can also change the public address.
For a scraper, that shows up as instability you didn’t cause. Connections drop mid-request. A sticky session loses its address. The exit changes more often than your rotation settings say it should. From the outside, it looks like a flaky proxy.
Operators handle this in different ways. Some lock modems to 4G where 5G coverage is marginal, trading theoretical capacity for stability. Some position modems or antennas to get a solid 5G signal. Some leave devices on automatic and accept the churn. As a buyer, you won’t see which choice was made unless you ask or measure.
A stable 4G line is generally more useful to a scraper than an unstable 5G one. That’s probably the most practical sentence in this whole piece.
Stability matters more than headline speed
Most scraping work is limited by something other than radio throughput.
A polite scraper paces its requests. It keeps concurrency low, respects crawl delays and rate limits, backs off on errors, and caches what it can. At that pace, a mobile line spends most of its time waiting, not transferring. The bottleneck is the scraper’s own restraint, the target’s response time, and the round trips across the internet, not the width of the radio link.
Heavier jobs change that a little. Downloading large files, rendering pages full of media in a browser, or sharing one line among many concurrent users all use more bandwidth, and on a congested cell a stronger radio link can help. But even there, the gain depends on the cell, the band and the time of day, and it’s hard to predict without testing in the exact location.
What almost every scraping job does need is stability. A connection that stays up. An address that changes when you ask it to and not otherwise. Consistent behaviour across a long job. Those properties come from the carrier’s network, the modem’s signal quality, and the operator’s hardware and power setup. A modem on a strong 4G signal with good power and a well-chosen APN will usually outperform, for scraping purposes, a 5G modem that keeps falling back.
So when evaluating an exit, weight uptime, disconnect frequency and rotation behaviour well above any speed number. You can measure all three yourself during a trial.
IPv6 on a mobile exit
IPv6 is another place where people expect 5G to make a difference and it usually doesn’t.
Many carriers now give mobile subscribers IPv6 addresses, sometimes alongside a shared IPv4 address behind carrier NAT, sometimes as the main connection with IPv4 handled through a translation layer. Whether a line gets IPv6, what prefix size it gets, and how IPv4 is provided alongside it are carrier and APN decisions. A carrier that offers IPv6 on its 4G service generally does the same on non-standalone 5G, since the same core is handing out the addresses.
For a scraper, IPv6 on a mobile exit matters in two ways. First, if the target serves IPv6 and your client prefers it, requests may leave over IPv6 while others leave over IPv4, and a target sees two different identities from one line. Second, IPv6 addresses are grouped by prefix, so the address count on a mobile IPv6 connection is effectively meaningless; what matters is the prefix and the carrier behind it. The subnet diversity piece on this site covers that grouping.
The practical steps are the same on both generations. Find out whether the line has IPv6. Check whether your target uses it. Decide deliberately whether your client should use IPv6, IPv4 or both, and log which protocol each request actually left over. A modem’s own view of its connection is worth checking directly as well, because host-level tests on a multi-modem box can report the wrong interface’s addressing.
Rotation works the same way on both
Rotation on a mobile exit usually means forcing the modem to reconnect, which prompts the carrier to assign it a fresh connection and often a different public address. The mechanism varies by setup, from a modem reconnect command to toggling airplane mode on a phone, but the outcome is decided by the carrier’s core.
That’s the same on 4G and 5G. Whether a reconnect gives you a new address, how quickly, and from which pool, is carrier behaviour. A carrier that hands out a fresh address on each reconnect on 4G generally does the same on non-standalone 5G, because the same core is assigning the address. Standalone 5G may differ if the carrier uses separate pools there.
The limits on rotation are also carrier limits. Carriers watch for devices that reconnect abnormally often, and some will throttle or bar a line that does. The piece on rotating too fast covers this, and it applies equally to both generations. A 5G modem gives you no extra rotation headroom, and in areas with fallback churn it may actually rotate less predictably, since some address changes happen when you didn’t ask for them.
So rotation settings should be chosen on the job’s needs and the carrier’s tolerance. For most scraping, that means far less rotation than people assume. The generation of the radio isn’t a factor you need to account for.
The carrier and the pool decide more
If the radio generation matters less than people think, what matters more?
The carrier, first. Different carriers have different address ranges, different NAT policies, different IPv6 support, different reputations with different sites, and different tolerance for reconnects. Two lines on different carriers in the same city can behave very differently for the same job. The carrier’s range is also what the target sees, so it’s the thing reputation attaches to.
The address pool, second. How many public addresses the carrier’s gateways use in your area, how many subscribers share each, and how much of that pool has been used by other proxy traffic before you. A carrier with a large pool and ordinary consumer usage gives each exit a lot of company. A small pool with heavy proxy traffic may have attracted attention.
The operator, third. How the modems are powered, cooled and configured. Whether they’re monitored for disconnects and address changes. How many customers share each line. How rotation is scheduled and rate limited.
The radio generation sits somewhere below all three, affecting mainly stability and the operator’s costs. On a given carrier and pool, a well-run 4G line and a well-run 5G line give a scraper much the same result. A badly run 5G line on a poor carrier loses to a well-run 4G line every time.
When 5G genuinely earns its place
There are cases where a 5G line is worth the extra money, and they’re worth naming so this doesn’t read as a blanket dismissal.
The first is contention on the line itself. If a provider shares one modem among several customers, or if your own job runs many concurrent browser sessions through one exit, the radio link can become the bottleneck, especially on a busy cell. More radio capacity gives that shared line more headroom. The benefit here goes to the sharing, not to any one polite scraper.
The second is heavy transfer. Jobs that download large files, archives or media through a mobile exit move enough data that link capacity starts to count. Even then, it’s worth asking whether that data needs to come through a mobile exit at all. Large public files usually don’t, and fetching them from a plain server connection is cheaper for everyone.
The third is a congested location. In an area where the 4G cells are heavily loaded at peak hours and a 5G layer is lightly used, a 5G line can be steadier in practice. That’s a local property of one place, and the only way to know is to test there.
The fourth is longevity. Carriers retire older generations and move spectrum to newer ones over time. That process is slow, and 4G networks will be around for years yet, but an operator buying hardware to run for a long time may reasonably prefer 5G-capable devices.
Notice what’s missing from that list: anything about the target treating 5G traffic more kindly. That’s the claim to watch for.
Questions to ask about a 5G listing
If a provider sells 5G mobile exits, a few questions will tell you what you’re actually getting.
Which carrier, in which country and city. That’s the most important answer, and it should be specific.
Standalone or non-standalone, and do they know. Many won’t, and that’s fine, but the ones who do have usually looked closely at their lines.
What happens on fallback. Is the modem locked to 5G, locked to 4G, or on automatic? If automatic, do they see address changes during fallback, and how often?
How they verify the line is on 5G. A device being 5G capable says nothing about whether it’s currently attached over 5G. An operator can read this from the modem’s status. Ask whether they monitor it.
Why the price differs. If a 5G line costs more, it’s reasonable to ask what the premium buys. A clear answer about hardware and plan costs is honest. An answer about 5G being “less detectable” is a claim nobody can support, since the target doesn’t see the radio.
How many customers share each line, and how rotation is rate limited. Those answers matter more than the generation and apply to both.
Testing an exit without trusting the label
You can’t see the radio from the exit side, so you can’t confirm 5G yourself. But you can measure everything that actually affects your scraper, and that’s more useful anyway.
Start with the carrier. Look up the network announcing your exit address and confirm it’s the carrier you were promised, in the country you were promised. Check whether IPv6 is available and whether the target you care about uses it.
Measure stability over a real period. Run a light, polite probe through the exit to an echo endpoint every few minutes for a day, logging the address and whether the request succeeded. Count disconnects and unexpected address changes. An exit that changes address when you didn’t ask it to, many times a day, may be dealing with fallback churn or a weak signal.
Test rotation deliberately. Trigger a rotation at a reasonable interval, and log how long it takes and whether the address changes. Repeat a few times, not dozens, and stay within whatever rotation limits the provider documents.
Then run a small sample of your actual job, at your real pace, against the real target, and compare the content you get against what an ordinary connection sees. That’s the only test that tells you whether the exit suits the job.
If two exits, one sold as 4G and one as 5G, come out the same on all of that, the cheaper one is the right buy.
What I can’t tell you
I can’t give you speed or latency numbers for 4G versus 5G exits, and I’d be suspicious of anyone who presents one as general. Radio performance depends on the band, the tower, the building, the load on the cell and the time of day. A number measured in one place describes that place.
I can’t tell you which carriers run standalone 5G on separate address pools, or where. That varies by carrier and country, changes as networks evolve, and is rarely published.
And I can’t tell you that any mobile exit, on either generation, will keep a scraper from being blocked. Mobile addresses get some benefit of the doubt because of the ordinary users behind them, and that benefit is limited and conditional. Request rate, client behaviour and the target’s rules still decide the outcome, and no radio changes them.
What I can say from the operator side is that the question “is it 5G?” usually points at the wrong variable. Ask which carrier, how stable the line is, how many people share it and how it rotates. Measure those during a trial. The generation of the radio is a detail of how the first hop is built, and the target never sees it.
If you want the rest of the mobile proxy picture, from carrier NAT to when mobile is worth paying for at all, Proxy Scraping has the full guides, written from inside a working farm.
Get new guides and videos first — join the Telegram channel.